Asus P5N73-AM - Manual (Page 50)

2-14 Chapter 2: BIOS information
2.4.2 CPU Configuration
CPU Internal Thermal Control [Auto]
Allows you to set the CPU internal thermal control to auto mode or disable it.
Configuration options: [Auto] [Disabled]
Limit CPUID MaxVal [Disabled]
Enables or disables the Limit CPUID MaxVal technology. Configuration options: [Disabled]
[Enabled]
Enhanced C1 (C1E) [Disabled]
Enables or disables the Enhanced C1 (C1E) technology. The process lowers the core to bus
ratio and VID when physical process enters an enhance C1 state.
Configuration options: [Enabled] [Disabled]
Execute Disable Bit [Enabled]
Enables or disables Intel ® Execute Disable Bit function. This function enhances protection
for your computer, reducing exposure to viruses and malicious buffer overflow attacks when
working with its supporting software and system.Configuration options: [Disabled] [Enabled]
Virtualization Technology [Enabled]
Enables or disables the Virtualization technology. When enabled, a VMM can utilize the
additional hardware capabilities provided by Vanderpool Technology.
Configuration options: [Enabled] [Disabled]
CPU Multiplier [7.0]
Allows you to select the ratio between CPU Core Clock and the FSB Frequency.
Configuration options: [6.0] [7.0]
Enhanced Intel SpeedStep(tm) Tech [Enabled]
Enables or disables the Enhanced Intel SpeedStep technology to adjust CPU speed
according to CPU workload. Configuration options: [Disabled] [Enabled]
2.4.3 Chipset
Frame Buffer Size [128M]
Allows you to set the frame buffer size. Configuration options: [16M] [32M] [64M] [128M]
[256M]
Primary Display Adapter [PCI-E]
Allows you to select the graphics controller to use as the primary boot device. Conffiguration
options: [PCI] [Onboard] [PCI-E]