Asus G-SURF365 - Manual (Page 87)

ASUS G-SURF365 2-35
2.6.5. Hardware.Monitor
Hardware Monitor
CPU Temperature [33ºC/91ºF]
MB Temperature [24ºC/75ºF]
CPU Fan Type [4 pin]
CPU Fan Speed [3013RPM]
Chassis Fan Speed [N/A]
VCORE Voltage [ 1.376V]
3.3V Voltage [ 3.280V]
5V Voltage [ 4.966V]
12V Voltage [11.916V]
Smart Q-FAN Function [Disabled]
CPU.Temperature.[xxxºC/xxxºF].
MB.Temperature.[xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures. Select Ignored if you do not wish to display the detected
temperatures.
CPU.Fan.Type.[4.pin]
Allows you to select the CPU fan type you installed on the motherboard.
Configuration options: [4 pin] [3 pin]
• If you use a 4-pin fan but set this item to a 3-pin fan, the fan you installed
may not work.
• If you use a 3-pin fan but set this item to a 4-pin fan, the fan control will not
work and the fan you installed will always run at full speed.
CPU.Fan.Speed.[xxxxRPM].or.[Ignored]
The onboard hardware monitor automatically detects and displays the CPU
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A. Select Ignored if you do not wish to display the
detected speed.
Chassis.Fan.Speed.[xxxxRPM].or.[N/A].or.[Ignored]
The onboard hardware monitor automatically detects and displays the chassis fan speed
in rotations per minute (RPM). If the fan is not connected to the chassis, the specific field
shows N/A. Select Ignored if you do not wish to display the detected speed.
CPU Temperature
BIOS SETUP UTILITY
Power
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit