Asus G-SURF365 - Manual (Page 44)

1-32 Chapter 1: Product introduction
9.. Serial.port.connectors.(10-1.pin.COM1)
The connector is for a serial (COM) port. Connect the serial port module
cable to the connector, then install the module to a slot opening at the back of
the system chassis.
10.. Front.panel.audio.connector.(10-1.pin.AAFP)
This connector is for a chassis-mounted front panel audio I/O module that
supports either High Definition Audio or AC`97 audio standard. Connect one
end of the front panel audio I/O module cable to this connector.
• We recommend that you connect a high-definition front panel audio module
to this connector to avail of the motherboard high-definition audio capability.
• If you want to connect a high-definition front panel audio module to this
connector, make sure that the Front.Panel.Select item in the BIOS is set
to [HD Audio]; if you want to connect an AC`97 front panel audio module to
this connector, set the item to [AC97]. See page 2-29 for details.
The serial port bracket (COM1) is purchased separately.
G-SURF365
®
PIN 1
COM1
G-SURF365.COM.port.connector
G-SURF365
®
G-SURF365.Analog.front.panel.connector
AAFP
Legacy.AC. 97.audio
pin.definition
SENSE2_RETUR
POR
T1 L
POR
T2 R
POR
T2 L
SENSE1_RETUR
SENSE_SEND POR
T1 R
PRESENCE#
GND
NC
MIC2 Line out_R Line out_L
NC
NC MICPWR
NC
AGND
HD.Audio-compliant
pin.definition