Asus G-SURF365 - Manual (Page 86)

2-34 Chapter 2: BIOS setup
2.6.4 APM Configuration
Power.Button.Mode.[On/Off]
Allows the system to go into On/Off mode or suspend mode when the power
button is pressed.
Configuration options: [On/Off] [Suspend]
Restore.on.AC.Power.Loss.[Power.Off]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss.
Configuration options: [Power Off] [Power On]
Power.On.By.PCI.Devices.[Disabled]
When set to [Enabled], this parameter allows you to turn on the system through a
PCI LAN or modem card. This feature requires an ATX power supply that provides
at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Power.On.By.Ring.[Disabled]
Enable or disable RI to generate a wake event.
Configuration options: [Disabled] [Enabled]
Power.On.By.PS/2.KB/MS.[Disabled]
Enable or disable PS/2 Keyboard/Mouse to generate a wake event.
Configuration options: [Disabled] [Enabled]
Power.On.By.RTC.Alarm.[Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to Enabled, the sub-items RTC.Alarm.Date and System.Time appear with set
values.
Configuration options: [Disabled] [Enabled]
APM Configuration
Power Button Mode [On/Off]
Restore on AC Power Loss [Power Off]
Power On By PCI Device [Disabled]
Power On By Ring [Disabled]
Power On By PS/2 KB/MS [Disabled]
Power On By RTC Alarm [Disabled]
Go into On/Off
or Suspend when
Power button
is pressed.
BIOS SETUP UTILITY
Power