Asus M3N-HT Deluxe/Mempipe - Manual (Page 62)

2-36 Chapter 2: Hardware information
10. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that
supports either HD Audio or legacy AC`97 audio standard. Connect one end
of the front panel audio I/O module cable to this connector.
• We recommend that you connect a high�definition front panel audio
module to this connector to avail of the motherboard’s high�definition audio
capability.
• If you want to connect a high�definition front panel audio module to this
connector, set the Front Panel Support Type item in the BIOS setup to
[HD Audio]; if you want to connect an AC'97 front panel audio module to
this connector, set the item to [AC97]. By default, this connector is set to
[HD Audio].
M3N-HT DELUXE
M3N-HT DELUXE Analog front panel connector
PIN 1
AAFP
GND PRESENCE# SENSE1_RETUR SENSE2_RETUR
PORT1
L
PORT1
R
PORT2
R
SENSE_SEND
PORT1
L
HD-audio-compliant
pin definition
PIN 1
AGND NC NC NC
MIC2
MICPWR
Line out_R
NC
Line out_L
Legacy AC’97
compliant definition
Light Loading
CPU Conroe
3.0+EM64T
Memory 1 GB*2
VGA 8800 Ultra*1
SATA-HDD 2
eSATA-HDD 1
IDE-CDROM 1
IDE-HDD 0
USB 4
+12V_8Pin +12V_24pin +5V_24pin +3V_24pin +12V_VGA1 +12V_VGA2 +12V_VGA3
Voltage (V) 12.19 12.21 5.22 3.456 12.16
Current (A) 3.19 5.55 5.04 5.36 6.5
Power (W) 38.886 67.766 26.309 18.524 79.04 0 0
SATA-HDD eSATA-HDD IDE-CDROM IDE-HDD USB Total PSU
Voltage (V) 2 1 1 0 4 Po_max(w)
Current (A) 10.45 10.45 10 12.68 2.5
281.875
Power (W) 20.9 10.45 10 0 10