6 security, Supervisor password user password, Typematic delay (msec) [250 – Asus M3N-HT Deluxe/Mempipe User Manual
Page 109: Os select for dram > 64mb [non-os2, Full screen logo [enabled, Halt on [all errors

ASUS M3N-HT Deluxe Series
4-37
4.6.6
Security
Select Menu
Item Specific Help
Security
Supervisor Password
Clear
User Password
Clear
Password Check
[Setup]
Phoenix-Award BIOS CMOS Setup Utility
Boot
Supervisor Password
User Password
These fields allow you to set passwords:
To set a password:
1. Select an item then press
2. Type in a password using a combination of a maximum of eight (8)
alpha-numeric characters, then press
3. When prompted, confirm the password by typing the exact characters again,
then press <�nter>. The password field setting is changed to Set.
Typematic Delay (Msec) [250]
Allows you to set the delay before keystrokes begin to repeat.
Configuration options: [250] [500] [750] [1000]
OS Select for DRAM > 64MB [Non-OS2]
Set this item to [OS2] only when you are running on an OS/2 operating system with
an installed RAM of greater than 64 MB. Configuration options: [Non�OS2] [OS2]
Full Screen LOGO [Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [�nabled]
Make sure that the above item is set to [Enabled] if you want to use the ASUS
MyLogo 3 feature.
Halt On [All Errors]
Allows you to set the error report type.
Configuration options: [All �rrors] [No �rrors] [All, But Keyboard] [All, But Diskette]
[All, But Disk/Key]