Asus M3N-HT Deluxe/Mempipe - Manual (Page 57)

ASUS M3N-HT Deluxe Series 2-31
4. USB connectors (10-1 pin USB34; 10-1 pin USB78; 10-1 pin USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 4�0 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
5. IEEE 1394a port connector (10-1 pin IE1394_1; 10-1 pin IE1394_2)
These connectors are for IEEE 1394a ports. Connect the IEEE 1394a
module cable to one of the connectors, then install the module to a slot
opening at the back of the system chassis.
M3N-HT DELUXE
M3N-HT DELUXE USB 2.0 connectors
PIN 1
USB+5V USB_P4- USB_P4+ GND NC
USB+5V USB_P3- USB_P3+
GND
USB34
PIN 1
USB+5V USB_P8- USB_P8+ GND NC
USB+5V USB_P7- USB_P7+
GND
USB78
PIN 1
USB+5V USB_P10- USB_P10+ GND NC
USB+5V USB_P9- USB_P9+
GND
USB910
You can connect the front panel USB cable to the ASUS Q-Connector (USB,
blue) first, and then install the Q�Connector (USB) to the USB connector
onboard if your chassis supports front panel USB ports.
M3N-HT DELUXE
M3N-HT DELUXE IEEE 1394 connectors
PIN 1
TPA2- GND TPB2- +12V GND
TPA2+
GND
TPB2+
+12V
IE1394_2
PIN 1
TPA2- GND TPB2- +12V GND
TPA2+
GND
TPB2+
+12V
IE1394_1
Never connect a USB cable to the IEEE 1394a connector. Doing so will damage
the motherboard!
You can connect the front panel 1394 cable to the ASUS Q-Connector (1394,
red) first, and then install the Q�Connector (1394) to the 1394 connector
onboard if your chassis supports front panel 1394 ports.