Asus P2V-B - Manual (Page 29)

ASUS P2V-B User’s Manual 29
III. HARDWARE SETUP
Connectors
III. H/W SETUP
3. Parallel Port Connector (26-1 pin PARALLEL)
This connector supports the included parallel and PS/2 mouse connector set.
Connect the parallel ribbon cable to this connector and mount the bracket to the
case on an open slot. A PS/2 mouse connector is included for the USB/IR/Mouse
onboard connector if the optional USB/MIR connector is not used. You can
make available the parallel port and choose the IRQ through “Onboard Parallel
Port” in Chipset Features of BIOS SETUP. (Pin 26 is removed to prevent
inserting in the wrong orientation when using ribbon cables with pin 26
plugged).
NOTE: Serial printers must be connected to the serial port.
P2V-B Parallel Port Connector
Parallel
Connector
PS/2 Mouse
Connector
Orient the red stripe
on the cable to PIN 1
PIN 1
USB/MIR
R
P2V-B
4. Serial Ports (10-1 pin COM1/COM2)
These connectors support the provided serial port ribbon cables with mounting
bracket. Connect the ribbon cables to these connectors and mount the bracket to
the case on an open slot. You can make available the serial port and choose the
IRQ through “Onboard Serial Port” in Chipset Features of BIOS SETUP. (Pin
10 is removed to prevent inserting in the wrong orientation when using
ribbon cables with pin 10 plugged).
P2V-B Serial Ports
COM 2
PIN 1
COM 1
PIN 1
R
P2V-B