Asus P2V-B - Manual (Page 21)

ASUS P2V-B User’s Manual 21
3. Central Processing Unit (CPU)
Your motherboard provides a Slot 1 connector for a Pentium ® III processor pack-
aged in a Single Edge Contact Cartridge (SECC2), a Pentium ® II processor pack-
aged in (SECC/SECC2), or a Celeron™ processor packaged in a Single Edge Pro-
cessor Package (SEPP). An ASUS S370 CPU card can allow Socket 370 processors
to be used on the Slot 1 connector (See ASUS S370 CPU Card in APPENDIX for
instructions on using this card).
III. HARDWARE SETUP
CPU
III. H/W SETUP
Heatsinks
The recommended heatsinks (see section on recommended heatsinks for Pentium
III / II processors for more information) for the boxed Pentium III / II and Celeron
processors are those with three-pin fans that can be connected to the fan connectors
on the motherboard.
WARNING! Be sure that there is sufficient air circulation across the processor’s
heatsink by regularly checking that your CPU fan is working. Without sufficient
circulation, the processor could overheat and damage both the processor and the
motherboard. You may install an auxiliary fan, if necessary.
Universal Retention Mechanism (URM)
Universal Retention Mechanism
Your motherboard comes preinstalled with a Universal Retention Mechanism (URM).
The URM supports Pentium III / II and Celeron processors.
Pentium II processor packaged in an SECC with heatsink and
fan (top view) Pentium III / II processor packaged in an SECC2 or Celeron™
processor packaged in an SEPP with heatsink and fan (top view)