Asus CS-B - Manual (Page 60)

2-30 Chapter 2: Getting started
Bits per second [115200]
Allows you to select the transmission speed of the serial port. Configuration options:
[9600] [19200] [57600] [115200]
Flow Control [None]
Flow control prevents data loss from buffer overflow. This item allows you to set the
flow control. Configuration options: [None] [Hardware RTS/CTS] [Software Xon/Xoff]
2.6.10 Onboard Devices Configuration
HD Audio Controller [Enabled]
[Enabled] Enables the HD Audio Device.
[Disabled] Disables the HD Audio Device.
The following item appears only when you set the HD Audio Controller item to [Enabled].
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-
definition audio depending on the audio standard that the front panel audio module supports.
[HD]
Sets the front panel audio connector (AAFP) mode to high definition audio.
[AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97
Realtek LAN Controller [Enabled]
[Enabled] Enables the Realtek ® LAN controller.
[Disabled] Disables the Realtek ® LAN controller.
The following item appears only when you set the Realtek LAN Controller to [Enabled].
Realtek PXE Option ROM [Disabled]
Allows you to enable or disable the PXE Option ROM of the Realtek LAN controller.
Configuration options: [Enabled] [Disabled]
Intel LAN Controller [Enabled]
[Enabled] Enables the Intel LAN controller.
[Disabled] Disables the controller.
Intel PXE OPROM [Disabled]
This item appears only when you set the previous item to [Enabled] and allows you to enable
or disable the PXE OptionRom of the Intel LAN controller. Configuration options: [Enabled]
[Disabled]