Asus Maximus II Formula - Manual (Page 98)

3-30 Chapter 4: BIOS setup
3.5.5 PCI PnP
The PCIPnP menu items allow you to change the advanced settings for PCI/PnP
devices.
Take caution when changing the settings of the PCI PnP menu items. Incorrect
field values can cause the system to malfunction.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug And Play O/S [No]
NO: lets the BIOS
configure all the
devices in the system.
YES: lets the
operating system
configure Plug and Play
(PnP) devices not
required for boot if
your system has a Plug
and Play operating
system.
BIOS SETUP UTILITY
Advanced
Plug And Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
3.5.6 LCD Poster and LED Control
ROG Logo [Enabled]
LCD Poster Backlight [Turn Off]
LCD Poster Mode [HWM Information]
HWM Select Mode [All Voltage]
Voltiminder LED [Enabled]
CPU LED Selection [Vcore]
NB LED Selection [NB]
SB LED Selection [SB 1.1]
ROG LED
BIOS SETUP UTILITY
Advanced