Asus Maximus II Formula - Manual (Page 83)

ASUS Maximus II Formula 3-15
ALL PRE to REF Delay [Auto]
Configuration options: [Auto] [1 DRAM Clocks]–[15 DRAM Clocks]
DRAM Static Read Control [Auto]
Configuration options: [Auto] [Disabled] [Enabled]
DRAM Read Training [Auto]
Configuration options: [Auto] [Disabled] [Enabled]
MEM. OC Charger [Auto]
Enable this item to increase DRAM overclockability.
Configuration options: [Auto] [Disabled] [Enabled]
Ai Clock Twister [Auto]
Allows you to configure the DRAM performance. Setting this item to [Light]
enhances the DRAM compatibility. Setting this item to [Strong] enhances the
DRAM performance. Configuration options: [Auto] [Lighter] [Light] [Moderate]
[Strong] [Stronger]
Ai Transaction Booster [Auto]
Configuration options: [Auto] [Manual]
C/P : A1 A2 A3 A4 (These values are auto-detected)
LVL : 12 12 12 12 (These values are auto-detected)
The following items appears when you set Ai Transaction Booster to [Manual].
Common Performance Level [05] (This value is auto-detected)
Set this item to a higher level for better compatibility or a lower level for
better performance. Use the <+> and <-> keys to adjust the value or type the
desired value using the numeric keypad. The values range from 1 to 31.
Pull-In of CHA/B PH1/2/3/4 [Disabled]
Set this item to [Enabled] to enhance DRAM Channel A and B, Phase 1 to
4. The number of phases is determined by DRAM frequency and FSB strap.
Configuration options: [Disabled] [Enabled]
PCIE Frequency [XXX]
Allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust
the PCIE frequency. You can also type the desired value using the numeric
keypad. The values range from 100 to 180. This item appears when you set Ai
Overclock Tuner to [CPU Level Up] or [Manual].