Asus Maximus II Formula - Manual (Page 150)

4-34 Chapter 5: Software support
Configuring EZ Backup
This mode allows one hard disk to back up the data on the other automatically.
This helps you save your vital data even if one hard disk is damaged.
• We recommend that you use two new hard disks for this setup.
• This setup erases all original data in the hard disk connected to the
SPEEDING HDD2 connector on the motherboard. Back up the data in this
hard disk before using this setup.
To start EZ Backup configuration:
1. Click EZ Backup from the main screen.
2. Click Apply to start configuration.
3. A warning message appears, reminding you that all original data in the hard
disk connected to the SPEEDING HDDD2 connector will be erased. Click Ok
to continue.
4. The setup is completed.
5. The Speeding HDD icon on the Windows ®
notification area turns green to indicate that
EZ Backup is set up successfully.