Asus A7N266 - Manual (Page 68)

ASUS A7N266 User’s Manual 68
4. BIOS SETUP
4. BIOS SETUP
PCI Configuration
PCI DMA Resource Exclusion
DMA x Reserved for Legacy Drive [No/ICU]
These fields indicate whether or not the DMA channel displayed for each
field is being used by a legacy (non-PnP) ISA card. The default setting
indicates either that the DMA channel displayed is not used or an ICU is
being used to determine if an ISA device is using the channel instead.
Configuration options: [No/ICU] [Yes]
PCI UMB Resource Exclusion
TSM MEM Block BASE [No/ICU]
This field allows yout to set the base address and block size of an onboard
legacy ISA device that uses any memory segment within the C800 and DFFF
address range. With such a device, select a base address from the options.
If an ICU is already in use, then leave the TSM MEM Block BASE to its
default setting of [No/ICU]. Configuration options: [No/ICU] [C800] [CC00]
[D000] [D400] [D800] [DC00]