beautypg.com

Chapter 3 – Asus Z87M-PLUS User Manual

Page 70

background image

3-12

Chapter 3: BIOS setup

Chapter 3

DRAM Timing Control

The subitems in this menu allow you to set the DRAM timing control features. Use the <+> or

<-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard and

press the key.

Changing the values in this menu may cause the system to become unstable! If this

happens, revert to the default settings.

Primary Timings
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [1] – [63]
DRAM COMMAND Mode [Auto]
Configuration options: [Auto] [1] – [3]

Secondary Timings
DRAM RAS# to RAS# Delay [Auto]
Configuration options: [Auto] [1] – [15]
DRAM REF Cycle Time [Auto]
Configuration options: [Auto] [1] – [511]
DRAM Refresh Interval [Auto]
Configuration options: [Auto] [1] – [65535]
DRAM WRITE Recovery Time [Auto]
Configuration options: [Auto] [1] – [16]
DRAM READ to PRE Time [Auto]
Configuration options: [Auto] [1] – [15]
DRAM FOUR ACT WIN Time [Auto]
Configuration options: [Auto] [1] – [255]
DRAM WRITE to READ Delay [Auto]
Configuration options: [Auto] [1] – [15]
DRAM CKE Minimum pulse width [Auto]
Configuration options: [Auto] [1] – [15]
DRAM CAS# Write to Latency [Auto]
Configuration options: [Auto] [1] – [31]