Asus Z87M-PLUS - Manual (Page 121)

ASUS Z87M-PLUS 4-5
Chapter 4
4.3.2 USB 3.0 Boost
USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol) that automatically
speeds up the transfer rates of your USB storage devices.
Launching USB 3.0 Boost
To launch USB 3.0 Boost, click on the top edge of the screen, then click USB 3.0 Boost
on the AI Suite 3 main menu bar.
Using the USB 3.0 Boost
1. Connect a USB 3.0 device to the USB 3.0 port.
2. From the USB 3.0 Boost screen, click to select a USB device.
3. To enable UASP on your USB device, click UASP. To revert to its normal transfer rate,
click Normal.
• Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
• Use the USB 3.0 devices for high performance. The data transfer speed varies with
USB devices.
Click to select a USB device
Click to enable the USB
device’s normal data
transfer rate
Click to enable UASP or
Turbo Mode to the USB
device for a faster data
transfer rate
USB 3.0 Boost screen