Asus P5E3 Premium/WiFi-AP@n - Manual (Page 98)

4-26 Chapter 4: BIOS setup
4.5.2 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press to display the sub-menu.
Advanced Chipset Settings
WARMING: Setting wrong values in below sections may cause
system to malfunction.
North Bridge Configuration
Configure North Bridge
features.
North Bridge Chipset Configuration
Memory Remap Feature [Enabled]
Initiate Graphic Adapter [PEG/PCI]
PEG Port Control [Auto]
PEG Port Force x1 [Disabled]
North Bridge Chipset Configuration
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of the overlapped PCI
memory above the total physical memory. Enable this option only when you
install 64-bit operating system. Configuration options: [Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot
device. Configuration options: [PCI/PEG] [PEG/PCI]
PEG Port Control [Auto]
Configuration options: [Auto] [Disabled]
The following item appears only when you set PEG Port Control to [Auto]
PEG Port Force x1 [Disabled]
Configuration options: [Enabled] [Disabled]
Enabled: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory.
BIOS SETUP UTILITY
Advanced
BIOS SETUP UTILITY
Advanced