beautypg.com

9 exit menu, Exit menu -43, Exit & save changes – Asus P5E3 Premium/WiFi-AP@n User Manual

Page 115: Exit & discard changes, Discard changes, Load setup defaults

background image

ASUS P5E3 Premium/WiFi-AP @n

4-43

4.9

Exit menu

The Exit menu items allow you to load the optimal or failsafe default values for the

BIOS items, and save or discard your changes to the BIOS items.

Pressing does not immediately exit this menu. Select one of the options

from this menu or from the legend bar to exit.

Select Screen

Select Item

Enter Go to Sub Screen

F1 General Help

F10 Save and Exit

ESC Exit

v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.

BIOS SETUP UTILITY

Main Ai Tweaker Advanced Power Boot Tools

Exit

Exit & Save Changes

Exit & Discard Changes

Discard Changes

Load Setup Defaults

Exit system setup

after saving the

changes.

F10 key can be used

for this operation.

Exit & Save Changes

Once you are finished making your selections, choose this option from the Exit

menu to ensure the values you selected are saved to the CMOS RAM. An onboard

backup battery sustains the CMOS RAM so it stays on even when the PC is turned

off. When you select this option, a confirmation window appears. Select Ok to save

changes and exit.

If you attempt to exit the Setup program without saving your changes, the

program prompts you with a message asking if you want to save your changes

before exiting. Press to save the changes while exiting.

Exit & Discard Changes

Select this option only if you do not want to save the changes that you made to

the Setup program. If you made changes to fields other than System Date, System

Time, and Password, the BIOS asks for a confirmation before exiting.

Discard Changes

This option allows you to discard the selections you made and restore the

previously saved values. After selecting this option, a confirmation appears. Select

Ok to discard any changes and load the previously saved values.

Load Setup Defaults

This option allows you to load the default values for each of the parameters on the

Setup menus. When you select this option or if you press , a confirmation

window appears. Select Ok to load default values. Select Exit & Save Changes or

make other changes before saving the values to the non-volatile RAM.