Asus P5E3 Premium/WiFi-AP@n - Manual (Page 59)

ASUS P5E3 Premium/WiFi-AP @n 2-33
7. Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this
connector. The chassis intrusion sensor or switch sends a high-level signal to
this connector when a chassis component is removed or replaced. The signal
is then generated as a chassis intrusion event.
By default , the pin labeled “Chassis Signal” and “Ground” are shorted with
a jumper cap. Remove the jumper caps only when you intend to use the
chassis intrusion detection feature.
P5E3 PREMIUM
®
P5E3 Premium/WiFi-AP @n
Chassis intrusion connector
CHASSIS
+5VSB_MB
Chassis Signal
GND
(Default)