Asus P5E3 Premium/WiFi-AP@n - Manual (Page 88)

4-16 Chapter 4: BIOS setup
4.4 Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Take caution when changing the settings of the Ai Tweaker menu items.
Incorrect field values can cause the system to malfunction.
4.4.1 Ai Overclock Tuner [Auto]
Allows selection of CPU overclocking options to achieve desired CPU internal
frequency. Select either one of the preset overclocking configuration options:
Manual Allows you to individually set overclocking parameters.
Auto Loads the optimal settings for the system.
X.M.P. If you install memory module(s) supporting the eXtreme
Memory Profile (X.M.P.) Technology, choose this item to set the
profile(s) supported by your memory module(s) for optimizing
the system performance.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
[X.M.P.]
When X.M.P. is enabled
the CPU FSB frequency,
CPU ratio and memory
parameters will be
optimized automatically
Configure System Performance Settings
Ai Overclock Tuner [Auto]
CPU Ratio Control [Auto]
FSB Strap to North Bridge [Auto]
DRAM Frequency [Auto]
DRAM Command Rate [Auto]
DRAM CMD Skew on Channel A [Auto]
DRAM CMD Skew on Channel B [Auto]
DRAM CLK Skew on Channel A [Auto]
DRAM CLK Skew on Channel B [Auto]
DRAM Timing Control [Auto]
1st Information : 6-6-6-15-4-36-6-4
2nd Information : 8-4-6-4-7-4-7
3rd Information : 15-6-1-7-7
DRAM Static Read Control [Auto]
DRAM Dynamic Write Control [Auto]
Ai Clock Twister [Auto]
Ai Transaction Booster [Auto]
Scroll down to display the following items:
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
C/P : A1 A2 A3 A4 A5 |
LVL : 11 11 11 11 11
**** Please key in voltage numbers directly! ****
CPU Voltage [Auto]
CPU GTL Voltage Reference [Auto]
CPU PLL Voltage [Auto]
FSB Termination Voltage [Auto]
DRAM Voltage [Auto]
NB Voltage [Auto]
NB GTL Voltage Reference [Auto]
SB voltage [Auto]
Clock Over-Charging Voltage [Auto]
*************************************************
Load-Line Calibration [Auto]
CPU Spread Spectrum [Auto]
PCIE Spread Spectrum [Auto]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit