beautypg.com

9 dram static read control [auto, 10 dram dynamic write control [auto, 11 ai clock twister [auto – Asus P5E3 Premium/WiFi-AP@n User Manual

Page 93: 12 ai transaction booster [auto, 13 cpu voltage [auto, Dram static read contro -21

background image

ASUS P5E3 Premium/WiFi-AP @n

4-21

4.4.9

DRAM Static Read Control [Auto]

Configuration options: [Auto] [Disabled] [Enabled]

4.4.10 DRAM Dynamic Write Control [Auto]

Configuration options: [Auto] [Disabled] [Enabled]

4.4.11 Ai Clock Twister [Auto]

Allows you to set the DRAM performance. Set this item to [Light] to enhance

DRAM compatibility, or [Strong] to enhance DRAM performance.

Configuration options: [Auto] [Lighter] [Light] [Moderate] [Strong] [Stronger]

4.4.12 Ai Transaction Booster [Auto]

Allows you to set the system performance.

Configuration options: [Auto] [Manual]

The following two sub-items appear only when you set the Ai Transaction

Booster item to [Manual].

Common Performance Level [05]

Set this item to a higher level for better compatibility or a lower level for better

performance. Use the <+> and <-> keys to adjust the value. The values

range from 1 to 31.
Pull-In of CHA/B PH1/2/3/4/5 [Disabled]

Set this item to [Enabled] to apply enhancement on DRAM Channel A and B,

Phase 1 to 5. The number of phases is determined by DRAM frequency and

FSB strap. Configuration options: [Disabled] [Enabled]

The following ten items are adjusted by typing the desired values using the

numeric keypad and press the key. You can also use the <+> and <->

keys to adjust the value. To restore the default setting, type [auto] using the

keyboard and press the key.

4.4.13 CPU Voltage [Auto]

Allows you to set the CPU VCore voltage. The values range from 0.85000V to

2.10000V* with a 0.00625V interval.

• Refer to the CPU documentation before setting the CPU Vcore voltage.

Setting a high VCore voltage may damage the CPU permanently, and

setting a low VCore voltage may make the system unstable.

• The value [2.10000V] of the CPU Voltage item is supported only if the

OV_CPU jumper is enalbed, otherwise the maximum voltage suppoted is

[1.70000V]. See 2. CPU / Northbridge overvoltage setting on page 2-23

for details.