Features, 2 optional components – Asus P4T-M User Manual
Page 9
ASUS P4T-M User’s Manual
9
2. FEATURES
•
Low Pin Count (LPC) Multi-I/O: Provides two high-speed UART compatible
serial ports and one parallel port with EPP and ECP capabilities. UART2 can
also be directed from COM2 to the Infrared Module for wireless connections.
•
Enhanced ACPI & Anti-Boot Virus Protection: Programmable BIOS (Flash
EEPROM), offering enhanced ACPI for Windows 98/2000/Millenium compat-
ibility, built-in firmware-based virus protection, and autodetection of most de-
vices for virtually automatic setup.
•
Smart BIOS: 4Mbit firmware gives a new easy-to-use interface which provides
more control and protection over the motherboard. Provides Vcore and CPU/
RDRAM frequency adjustments, boot block write protection, and HD/SCSI/MO/
ZIP/CD/Floppy boot selection.
•
IrDA: Supports an optional infrared port module for a wireless interface.
•
Concurrent PCI: Concurrent PCI allows multiple PCI transfers from PCI
master bus to the memory and processor.
2.1.2 Optional Components
•
Realtek RTL8139C Ethernet: (optional) Single chip fast ethernet controller
for 100/10 Mbps data transfer capacity. (See 4.4.2: I/O Device Configuration
in BIOS setup).
•
IEEE 1394 Controller Interface: (optional) Integrated 3 Port TI
®
400Mbps
capable link-layer controller and 400Mbps physical layer controller provides
the fastest available digital interface for throughput intensive consumer elec-
tronics devices like: DV camcorders, digital cameras, scanners, and printers.
The IEEE-1394 supports traditional asynchronous data transfer as well as isoch-
ronous (real-time) data transfer. Up to 63 peripheral devices may be connected
simultaneously. The IEEE 1394 is the fastest available interface for the latest
consumer electronics devices.
2. FEA
TURES
Optional Components