Hardware setup – Asus P4T-M User Manual
Page 29
ASUS P4T-M User’s Manual
29
3. HARDWARE SETUP
Connectors
3. H/W SETUP
8) Joystick/MIDI Connector (15-pin Female GAME_AUDIO)
You may connect game joysticks or game pades to this connector for playing
games. Connect MIDI devices for playing or editing audio.
Game/MIDI (15-pin Female)
9) Audio Port Connectors (Three 1/8” Female)
Line Out can be connected to headphones or preferably powered speakers.
Line In allows tape players or other audio sources to be recorded by your com-
puter or played through the Line Out. Mic allows microphones to be connected
for inputting voice.
Mic
Line In
Line Out
1/8" Stereo Audio Connectors
10) Floppy Disk Drive Connector (34-1pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After connect-
ing the single end to the board, connect the two plugs on the other end to the
floppy drives. (Pin 5 is removed to prevent inserting in the wrong orienta-
tion when using ribbon cables with pin 5 plugged).
P4T-M
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
P4T-M Floppy Disk Drive Connector
PIN 1
FLOPPY