beautypg.com

Hardware setup, Asus p4t-m user’s manual 33 – Asus P4T-M User Manual

Page 33

background image

ASUS P4T-M User’s Manual

33

3. HARDWARE SETUP

Connectors

3. H/W SETUP

17) Wake-On-LAN Connector (3-pin WOL)

This connector supports a LAN card with a Wake-On-LAN output, such as the
ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up the
system when a wakeup packet or signal is received through the LAN card.

IMPORTANT:

This feature requires that Wake On LAN or PCI Modem is

enabled (see BIOS 4.5.1 Power Up Control) and that your system has an ATX
power supply with at least 720mA +5V standby power.

P4T-M

P4T-M Wake-On-LAN Connector

IMPORTANT: Requires an ATX power
supply with at least 720mA +5 volt
standby power

+5 Volt Standby

PME

Ground

WOL_CON

16) Digital Audio Interface Connector (3-pin SPDIFOUT)

This connector is used to send audio signal outputs to amplifiers and speakers
and to digital recording devices like mini CD player/recorders.

P4T-M

P4T-M Digital Audio Interface

SPDIFOUT

SPDIFOUT

+5V

Ground

1