Asus M5A97 R2.0 - Manual (Page 79)

ASUS M5A97 R2.0 3-19
Chapter 3
SB HD Azalia Configuration
Allows you to change the HD Azalia configuration.
[Enabled]
Enables the High Definition Audio Azalia device.
[Disabled] Disables the device.
The following two items appear only when you set the HD Audio Azalia Device item to
[Enabled].
Azalia Front Panel [HD]
Allows you to set the Azalia front panel audio connector (AAFP) type to legacy AC’97
or high-definition audio depending on the audio standard that the front panel audio
module supports.
[HD] Sets the front panel audio connector (AAFP) mode to high definition
audio.
[AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97
SPDIF Out Type [SPDIF]
[SPDIF]
Sets to [SPDIF] for SPDIF audio output.
[HDMI] Sets to [HDMI] for HDMI audio output.
3.5.8 APM
ErP Ready [Enabled]
Allows the BIOS to switch off some power at S5 to get the system ready for ErP requirement.
When this item is set to [Enabled], all other PME options will be switched off. Configuration
options: [Enabled] [Disabled]
The following items appear only when you set the ErP Ready to [Disabled].
Restore AC Power Loss [Power Off]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By PS/2 Device [Disabled]
Allows you to use PS/2 device to turn on the system. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
Power On By PME [Disabled]
[Disabled] Disables the PME to wake up by PCI/PCIE devices.
[Enabled] Allows you to turn on the system through a PCI/PCIE LAN or modem card.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.