Asus M5A97 R2.0 - Manual (Page 75)

ASUS M5A97 R2.0 3-15
Chapter 3
SVM [Enabled]
[Enabled] Enables the AMD Secure Virtual Machine mode.
[Disabled] Disables this function.
Core C6 State [Enabled]
Enables or disables Core C6 state function. Configuration options: [Disabled] [Enabled]
HPC Mode [Enabled]
Allows you to disable or enable High Performance Computing Mode. Configuration options:
[Enabled] [Disabled]
Apm Master Mode [Auto]
Enables or disables Application Power Management. Configuration options: [Disabled]
[Enabled]
3.5.2 North Bridge
IOMMU [Disabled]
Allows you to disable or enable the IOMMU. IOMMU is supported on Linux based systems to
convert 32bit I/O to 64bit MMIO. Configuration options: [Disabled] [Enabled]
Memory Configuration
Allows you to set the related memory configurations.
Bank Interleaving [Auto]
Allows you to enable the bank memory interleaving. Configuration options: [Auto]
[Disabled]
Channel Interleaving [Auto]
Allows you to enable the channel memory interleaving. Configuration options:
[Disabled] [Auto]
ECC Mode [Enabled]
Allows you to enable or disable the ECC mode. Configuration options: [Disabled]
[Enabled]
Power Down Enable [Disabled]
Allows you to enable or disable the DDR power down mode. Configuration options:
[Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Allows you to enable or disable memory remapping around memory hole.
Configuration options: [Disabled] [Enabled]
DCT Unganged Mode [Enabled]
Allows you to select unganged mode or ganged mode. Configuration options:
[Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the primary boot graphic controller. Configuration options: [PEG/PCI]
[PCI/PEG]