beautypg.com

Asus P4S133 User Manual

Page 44

background image

32

Chapter 2: Hardware information

5. ATX power connectors (20-pin ATXPWR, 4-pin ATX+12V)

These connectors connect to an ATX 12V power supply. The plugs from
the power supply are designed to fit these connectors in only one
orientation. Find the proper orientation and push down firmly until the
connectors completely fit.

In addition to the 20-pin ATXPWR connector, this motherboard requires
that you connect the 4-pin ATX +12V power plug to provide sufficient
power to the CPU.

Make sure that your ATX 12V power supply can provide at least 8A on
the +12V lead and at least 1A on the +5-volt standby lead (+5VSB).
The minimum recommended wattage is 230W, or 300W for a fully
configured system. The system may become unstable and may
experience difficulty powering up if the power supply is inadequate.

P4S133

®

P4S133 ATX & Auxiliary Power Connectors

ATXPWR1

ATX12V1

AUX12V1

+12V

GND

+5V

GND

Pin 1

+3.3VDC

-12.0VDC

COM

PS_ON#

COM

COM

COM

-5.0VDC

+5.0VDC

+5.0VDC

PWR_OK

+12.0VDC

+3.3VDC

+3.3VDC

COM

+5.0VDC

COM

+5.0VDC

COM

+5VSB

+12V DC

COM

+12V DC

COM

Pin 1

6. USB header (10-1 pin USB2)

If the USB port connectors on the rear panel are inadequate, a USB
header is available for additional USB port connectors. Connect the
bundled 2-port USB connector set to this header and mount the USB
bracket to an open slot in the chassis.

P4S133

®

P4S133 Front Panel USB Headers

USB1

USB2

NC

GND

USBP2+

USBP2

USB Power

GND

USBP3+

USBP3

USB Power

1

5

6

10

NC

GND

USBP2+

USBP2

USB Power

GND

USBP3+

USBP3

USB Power

1

5

6

10