Asus P4S133 - Manual (Page 35)

ASUS P4S133 motherboard user guide 23
2.7 Jumpers
The jumpers on the motherboard allow you to change some feature
settings to suit your customized system configuration.
Before changing any DSW or jumper setting, make sure to read the
jumper descriptions and setting requirements in this section.
P4S133
®
P4S133 DIP Switches
DSW1
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
5. Frequency Selection
ON OFF
ON 12345
P4S133
®
P4S133 JumperFree™ Mode Setting
JEN1
Jumper Free
(Default)
Jumper Mode
DSW1 ON 12345
ON OFF
2
3
1
2
1) JumperFree ™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree ™ mode.
The default setting, [2-3], enables the use of JumperFree ™ mode. The
JumperFree ™ mode allows processor settings to be made through the
BIOS setup (see 4.4 Advanced Menu).
Motherboard Frequency Settings (DSW Switches)
The motherboard frequency is adjusted through the DSW switches. The
white block represents the switch’s position. The illustration below shows
all the switches in the OFF position.