Memclk tristate c3/atlvid [disabled, Dct.unganged.mode, Power.down.enable.[enabled – Asus M3A78-EMH HDMI User Manual
Page 76

2-24
Chapter 2: BIOS setup
Memory Configuration
Bank Interleaving [Auto]
Allows you to enable the bank memory interleaving.
Configuration options: [Disabled] [Auto]
Channel Interleaving [Disabled]
Allows you to enable the channel memory interleaving.
Configuration options: [Disabled] [Address bits 6] [Reserved]
[Address bits 12] [Reserved] [XOR of Address bits [20:16, 6]] [Reserved]
[XOR of Address bits [20:16, 9]]
Advanced
Memory Configuration
Bank Interleaving
[Auto]
Channel Interleaving
[Disabled]
MemClk Tristate C3/ATLVID
[Disabled]
Memory Hole Remapping
[Enabled]
DCT Unganged Mode
[Always]
Power Down Enable
[Enabled]
Power Down Mode
[Channel]
Enable Bank Memory
Interleaving
MemClk Tristate C3/ATLVID [Disabled]
Allows you to enable or disable MemClk Tri-Stating during C3 and Alt VID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Allows you to enable or disable memory remapping around memory hole.
Configuration options: [Disabled] [Enabled]
DCT.Unganged.Mode
Allows you to select unganged DRAM mode (64-bit width).
Configuration options: [Auto] [Always]
Power.Down.Enable.[Enabled]
Allows you to enable or disable DDR power down mode.
Configuration options: [Disabled] [Enabled]
Power Down Mode [Channel]
Appears only when you enable the Power Down Enable item.
Configuration options: [Channel] [Chip Select]