Asus M3A78-EMH HDMI - Manual (Page 74)

2-22 Chapter 2: BIOS setup
2.4.3 CPU Configuration
GART Error Reporting [Disabled]
This option should remain disabled for the normal operation. The driver developer
may enable it for testing purpose.
Configuration options: [Disabled] [Enabled]
2.4.2 Hyper Transport Configuration
The items in this menu show the CPU-related information that the BIOS
automatically detects.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
CPU Configuration
Module Version: 13.20
AGESA Version: 3.1.4.0
Physical Count: 1
Logical Count: 1
AMD Sempron(tm) Processor 3200+
Revision: F2
Cache L1: 128 KB
Cache L2: 128 KB
Cache L3: N/A
Speed : 1800MHz
Current FSB Multiplier: 9x
Maximum FSB Multiplier: 9x
Able to change Freq. : Yes
uCode Patch Level : 0x62
GART Error Reporting [Disabled]
Microcode Updation [Enabled]
Secure Virtual Machine Mode [Enabled]
Cool ‘n’ Quiet [Enabled]
This option should
remain disabled for
the normal operation.
The driver developer
may enable it for
testing purpose.
BIOS SETUP UTILITY
Advanced
Link Speed [Auto]
Allows you to set the HyperTransport link speed.
Configuration options:[200MHz] [400MHz] [600MHz] [800 MHZ] [1 GHz] [Auto]
Link Width [Auto]
Allows you to set the HyperTransport link width.
Configuration options: [Auto] [4 Bit] [8 Bit] [16 Bit]
Hyper Transport Configuration
NODEO:PCI-X2 HT Link
Link Speed [Auto]
Link Width [Auto]
The HyperTransport
link will run at this
speed if it is slower
than or equal to the
system clock and the
board is capable.