6 sata configuration, Block (multi-sector transfer) m [auto, Pio mode [auto – Asus M3A78-EMH HDMI User Manual
Page 71: Dma mode [auto, Smart monitoring [auto, 32bit.data.transfer.[disabled, Onchip.sata.channel.[enabled

ASUS M3A78-EMH HDMI
2-19
Block (Multi-sector Transfer) M [Auto]
Enables or disables data multi-sectors transfers. When set to [Auto], the data
transfer from and to the device occurs multiple sectors at a time if the device
supports multi-sector transfer feature. When set to [Disabled], the data transfer
from and to the device occurs one sector at a time.
Configuration options: [Disabled] [Auto]
PIO Mode [Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode.
Configuration options: [Auto] [SWDMAO] [SWDMA1] [SWDMA2] [MWDMA0]
[MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]
[UDMA6]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit.Data.Transfer.[Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
2.3.6
SATA Configuration
The Storage Configuration menu allows you to configure your storage device(s).
Select an item then press
BIOS SETUP UTILITY
Main
OnChip SATA channel
[Enabled
]
OnChip SATA Type
[SATA]
SATA IDE Combined Mode
[Enabled]
Storage Configuration
Options
Disabled
Enabled
OnChip.SATA.Channel.[Enabled]
Enables or disables OnChip SATA Channel.
Configuration options: [Disabled] [Enabled]