beautypg.com

11 dram timing control [auto, 12 cpu voltage [auto, 13 cpu pll voltage [auto – Asus P6X58-E WS User Manual

Page 87: 14 qpi/dram core voltage [auto, 15 ioh voltage [auto, 16 ioh pcie voltage [auto

background image

ASUS P6X58-E WS

3-17

3.4.11 DRAM Timing Control [Auto]

The items in this menu allow you to set the DRAM timing control features.

The configuration options for some of the following items vary depending on the

depending on the

DIMMs you install on the motherboard.

The following fourteen (14) items are adjusted by typing the desired values

using the numeric keypad and press the key. You can also use the <+>

and <-> keys to adjust the value. To restore the default setting, type [auto] using

the keyboard and press the key.

3.4.12 CPU Voltage [Auto]

Allows you to set the CPU VCore voltage. The values range from 0.85000V to

2.10000V* with a 0.00625V interval.

• Refer to the CPU documentation before setting the CPU VCore voltage.

Setting a high VCore voltage may damage the CPU permanently, and

setting a low VCore voltage may make the system unstable.

• The value [2.10000V] of the CPU Voltage item is supported only if the

OV_CPU jumper is enabled. Otherwise the maximum voltage supported is

[1.70000V]. See 2. CPU / DRAM Bus / QPI DRAM overvoltage setting on

page 2-22 for details.

3.4.13 CPU PLL Voltage [Auto]

Allows you to set the CPU PLL voltage. The values range from 1.80V to 2.50V with

a 0.02V interval.

3.4.14 QPI/DRAM Core Voltage [Auto]

Allows you to set the QPI/DRAM Core voltage. The values range from 1.20000V to

1.90000V* with a 0.00625V interval.

The value [1.90000V] of the QPI/DRAM Core Voltage item is supported only

if the OV_QPI_DRAM jumper is enabled. Otherwise the maximum voltage

supported is [1.70000V]. See 2. CPU / DRAM Bus / QPI DRAM overvoltage

setting on page 2-22 for details.

3.4.15 IOH Voltage [Auto]

Allows you to set the I/O Hub (IOH) voltage. The values range from 1.10V to 1.70V

with a 0.02V interval.

3.4.16 IOH PCIE Voltage [Auto]

Allows you to set the IOH PCIE voltage. The values range from 1.50V to 2.76V

with a 0.02V interval.