Asus P6X58-E WS - Manual (Page 86)

3-16 Chapter 3: BIOS setup
3.4.5 High TDP Turbo Mode [Auto]
Configuration options: [Auto] [Enabled] [Disabled]
The following two items appear only when you set the Ai Overclock Tuner item
to [Manual], [D.O.C.P.] or [X.M.P.].
3.4.6 BCLK Frequency [XXX]
Allows you to adjust the Internal Base Clock (BCLK). Use the <+> and <-> keys to
adjust the value. You can also type the desired value using the numeric keypad.
The values range from 100 to 500.
3.4.7 PCIE Frequency [XXX]
Allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust
the PCIE frequency. The values range from 100 to 200.
3.4.8 DRAM Frequency [Auto]
Allows you to set the DDR3 operating frequency.
Configuration options: [Auto] [DDR3-1066MHz] [DDR3-1333MHz]
[DDR3-1600MHz] [DDR3-1866MHz] [DDR3-2133MHz] [DDR3-2400MHz]
The DRAM Frequency configuration options vary with the BCLK Frequency
item settings.
Selecting a very high DRAM frequency may cause the system to become
unstable! If this happens, revert to the default setting.
3.4.9 UCLK Frequency [Auto]
Allows you to set the Uncore Clock Ratio (UCLK).
Configuration options: [Auto] [1600MHz] [1733MHz] [1866MHz] [2000MHz]
[2133MHz] [2266MHz] [2400MHz] [2533MHz] [2666MHz] [2800MHz] [2933MHz]
[3066MHz] [3200MHz] [3333MHz] [3466MHz]
The UCLK Frequency configuration options vary with the DRAM Frequency
item settings.
3.4.10 QPI Link Data Rate [Auto]
Allows you to set the QuickPath Interconnect (QPI) frequency.
Configuration options: [Auto] [4800MT/s] [5866MT/s] [6400MT/s]