Asus M5A99X EVO - Manual (Page 85)

ASUS M5A99X EVO 3-21
Chapter 3
SB HD Azalia Configuration
Options for SB HD Azalia.
HD Audio Azalia Device [Enabled]
Allows you to enable or disable the HD Audio controller.
Configuration options: [Disabled] [Enabled]
Azalia Front Panel [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or
high-definition audio depending on the audio standard that the front panel audio
module supports.
[AC 97] Sets the front panel audio connector (AAFP) mode to legacy AC’97
[HD] Sets the front panel audio connector (AAFP) mode to high definition audio.
SPDIF Out Type [SPDIF]
[SPDIF]
Sets to [SPDIF] for SPDIF audio output.
[HDMI] Sets to [HDMI] for HDMI audio output.
eSATA (JMB controller) & PCIEX1_1 Detection [Auto]
[Auto] The system auto-detects the occupied PCIEX1_1 slot or eSATA/Power
eSATA connector. When both are occupied, only PCIEX1_1 slot can work.
[eSATA] If eSATA (JMB controller) is enabled, PCIEX1_1 slot will be blocked and
you can connect eSATA/Power eSATA devices.
3.5.7 APM
Main Ai Tweaker Advanced Monitor Boot Tool
Exit
Allow BIOS to switch off some power
at S5 to get the system ready for Eup
requirement. When set to Enabled, all
other PME options will be switched off.
Back Advanced\ APM >
UEFI BIOS Utility - Advanced Mode
ErP Ready Enabled
ErP Ready [Enabled]
[Disabled] Disables the Energy Related Products (ErP) Ready function.
[Enabled] Allows BIOS to switch off some power at S5 state to get system ready for
the ErP requirement. When set to [Enabled], power for WOL, WO_USB,
audio and onboard LEDs will be switched off at S5 state.