beautypg.com

2 north bridge configuration, North bridge configuration -15, Chapter 3 – Asus M5A99X EVO User Manual

Page 79: Iommu mode [disabled, Initiate graphic adapter [peg/pci

background image

ASUS M5A99X EVO

3-15

Chapter 3

3.5.2

North Bridge Configuration

Main

Ai Tweaker

Advanced

Monitor

Boot

Tool

Exit

IOMMU is supported on LINUX based
systems to convert 32bit I/O to 64bit
MMIO.

Back

Advanced\

North Bridge Configuration >

UEFI BIOS Utility - Advanced Mode

IOMMU Mode [Disabled]

IOMMU is supported on LINUX based systems to convert 32bit I/O to 64bit MMIO.
Configuration options: [Disabled] [64MB]

Memory Configuration

Bank Interleaving [Auto]
Configuration options: [Aute] [Disabled]

Channel Interleaving [Auto]
Configuration options: [Aute] [Disabled]

ECC Mode [Enable]
Enables or disables the DRAM ECC mode that allows the hardware to report and
correct memory errors.

[Disabled] Disables the DRAM ECC mode.
[Enable]

Set to [Enable] to adjust ECC mode automatically.

Power Down Enable [Disabled]
Enables or disables the DDR power down mode.
Configuration options: [Disabled] [Enabled]

Memory Hole Remapping [Enabled]
Configuration options: [Disabled] [Enabled]

DCT Unganged Mode [Enabled]
Configuration options: [Disabled] [Enabled]

Initiate Graphic Adapter [PEG/PCI]

Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [PCI/PEG] [PEG/PCI]

North Bridge Configuration

IOMMU Mode

Disabled

> Memory Configuration

Initate Graphic Adapter

PEG/PCI

Starting Address: 0 KB
Ending Address: 5242880 KB

Dimm0: Not Present
Dimm1: size=2048 MB, speed=1333 MHz
Dimm2: Not Present
Dimm3: size=2048 MB, speed=1333 Mhz