Asus M4A88T-I DELUXE - Manual (Page 59)

ASUS M4A88T-I Deluxe 2-19
MemClk Tristate C3/ATLVID [Disabled]
Allows you to enable or disable MemClk Tri-Stating during C3 and Alt VID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Allows you to enable or disable memory remapping around memory hole.
Configuration options: [Disabled] [Enabled]
DCT Unganged Mode [Auto]
Allows you to select the unganged DRAM mode (64-bit width).
Configuration options: [Auto] [Always]
Power Down Enable [Disabled]
Allows you to enable or disable DDR power down mode.
Configuration options: [Disabled] [Enabled]Internal Graphics
Primary Video Controller [GFX0-IGFX]
Allows you to set the primary display adapter. Configuration options: [GFX0-IGFX]
[IGFX-GFX0]
Internal Graphics Mode [UMA]
Selects the internal graphics mode. Configuration options: [Disabled] [UMA]
UMA Frame Buffer Size [Auto]
This item appears only when you set the Internal Graphics Mode item to [UMA].
Configuration options: [Auto] [32MB] [64MB] [128MB] [256MB] [512MB] [1024MB]
• The [512MB] option only appears when you install 1GB or higher capacity DIMMs.
• The [1024MB] option only appears when you install 2GB or higher capacity DIMMs.
Surround View [Auto]
If you set the PCI Express device as the primary display and enable this item, you may use
the internal graphics as the secondary display. This item appears only when you set the
Internal Graphics Mode item to [UMA]. Configuration options: [Auto] [Enabled] [Disabled]
When set to [Auto], only the primary display could be activated.
Frame Buffer Location [Above 4G]
Allows you to select the FB Location. Configuration options: [Below 4G] [Above 4G]
AMD HDMI Audio [Enabled]
Allows you to disable or enable the AMD 880 HD Audio.
Configuration options: [Disabled] [Enabled]
2.5.3 Onboard Devices Configuration
HDAudio Controller [Enabled]
Enables or disables the high definition audio controller. Configuration options: [Disabled]
[Enabled]