2 memory configurations, Memory configurations -12 – Asus M4A88T-I DELUXE User Manual
Page 24
1.7.2
Memory configurations
You may install 512MB, 1GB, 2GB, and 4GB unbuffered non-ECC DDR3 SO-DIMMs into the
DIMM sockets.
• You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
• Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from the same vendor.
• Due to CPU spec., AMD
®
100 and 200 series CPUs support up to DDR3 1066MHz. With
ASUS design, this motherboard can support up to DDR3 1333MHz.
• When overclocking, some AMD CPU models may not support DDR3 1600 MHz or
higher frequency DIMMs.
• Due to the memory address limitation on 32-bit Windows
®
OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
-
Install a maximum of 3GB system memory if you are using a 32-bit Windows
®
OS.
-
Use a 64-bit Windows
®
OS if you want to install 4GB or more memory on the
motherboard.
• This motherboard does not support DIMMs made up of 256 megabits (Mb) chips or less.
M4A88T-I Deluxe Motherboard Qualified Vendors Lists (QVL)
DDR3-1333MHz capability
• The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked or at a
higher frequency, refer to section 2.4 Ai Tweaker menu for manual memory frequency
adjustment.
• For system stability, use a more efficient memory cooling system to support a full
memory load (2 SO-DIMMs) or overclocking condition.
Vendor
Part No.
Size SS/
DS
Chip
Brand
Chip NO.
Timing Voltage
DIMM socket
support (Optional)
A*
B*
A-Data
AD73I1B1672EG
2GB DS
ADATA
AD3BC8D-13339HPF1012F
-
-
•
•
Elpida
EBJ21UE8BDS0-DJ-F
2GB DS
Elpida
J1108BDSE-DJ-F 094909KOW20 -
-
•
•
G.SKILL
F3-10666CL9D-4GBSQ
2GB DS
G.SKILL D3 128M8GE91002 G72E37
-
-
•
•
G.SKILL
F3-10666CL9S-2GBSQ
2GB DS
G.SKILL D3 128M8GE91003 H27E84
-
-
•
•
Hynix
HMT112S6TFR8C-H9
1GB SS
Hynix
H5TQ1G83TFRH9C
-
-
•
•
Hynix
HMT125S6TFR8C-H9
2GB DS
Hynix
0
-
-
•
•
Kingston
ASU1333D3S9DR8/2G
2GB DS
Kingston D1288JELDNGD9U
-
-
•
•
Kingston
ASU1333D3S9DR8G/4G 4GB DS
Hynix
H5TQ2G83AFRH9C
-
-
•
•
Asint
SSY3128M8-EDJED
1GB DS
Elpida
J1108BDBG-DJ-F 1011RR22020
-
-
•
•
Asint
SSZ3128M8-EDJED
2GB DS
Elpida
J1108BDBG-DJ-F 10070966E20
-
-
•
•
TEAM
TSD32048M1333C9-E
2GB DS
Hynix
H5TQ1G83AFPH9C 919AA
-
-
•
•
Chapter 1: Product introduction
1-12