Asus M4A88T-I DELUXE - Manual (Page 31)

1. CPU and chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
Only the 4-pin CPU fan and chassis fan support the ASUS Fan Xpert feature.
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside
the system may damage the motherboard components. These are not jumpers! DO NOT
place jumper caps on the fan connectors.
1.10.2 Internal connectors
M4A88T-I DELUXE
M4A88T-I DELUXE fan connectors
CHA_FAN
Rotation
+12V
GND
CPU_FAN
CPU FAN PWM
CPU FAN IN
CPU FAN PWR
GND
2. USB connector (10-1 pin USB78)
This connector is for USB 2.0 ports. Connect the USB module cable to this connector,
then install the module to a slot opening at the back of the system chassis. This USB
connector complies with USB 2.0 specification that supports up to 480Mbps connection
speed.
Never connect a 1394 cable to the USB connector. Doing so will damage the motherboard!
The USB 2.0 module is purchased separately.
M4A88T-I DELUXE
M4A88T-I DELUXE USB2.0 connector
PIN 1
USB+5V USB_P8- USB_P8+ GN
D
NC
USB+5V USB_P7- USB_P7+
GN
D
USB78
ASUS M4A88T-I Deluxe 1-19