Asus P5AD2 Deluxe User Manual

Page 48

2 - 2 6

C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n

6 .

O p t i c a l d r i v e a u d i o c o n n e c t o r ( 4 - p i n C D )

O p t i c a l d r i v e a u d i o c o n n e c t o r ( 4 - p i n C D )
This connector is for the 4-pin audio cable that connects to the audio
connector at the back of the optical drive.

Enable the CD-IN function in the audio utility when using this
connector.

P5AD2

P5AD2 Deluxe CD audio connector

Right A

udio Channel

Left A

udio Channel

Ground

7 .

C h a s s i s i n t r u s i o n c o n n e c t o r ( 4 - 1 p i n C H A S S I S 1 )

C h a s s i s i n t r u s i o n c o n n e c t o r ( 4 - 1 p i n C H A S S I S 1 )
This connector is for a chassis-mounted intrusion detection sensor or
switch. Connect one end of the chassis intrusion sensor or switch
cable to this connector. The chassis intrusion sensor or switch sends a
high-level signal to this connector when a chassis component is
removed or replaced. The signal is then generated as a chassis
intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted
with a jumper cap. Remove the jumper caps only when you intend to
use the chassis intrusion detection feature.

P5AD2

P5AD2 Deluxe Chassis intrusion connector

CHASSIS1

+5VSB_MB

Chassis Signal

GND

(Default)