3 security security security security security – Asus P5AD2 Deluxe User Manual

Page 104

4 - 3 8

C h a p t e r 4 : B I O S s e t u p

Interrupt 19 Capture [Disabled]

When set to [Enabled], this function allows the option ROMs to trap
Interrupt 19. Configuration options: [Disabled] [Enabled]

4.6.3

Security

The Security menu items allow you to change the system security settings.
Select an item then press to display the configuration options.

Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit

Security Settings

Supervisor Password : Not Installed
User Password : Not Installed

Change Supervisor Password

Boot Sector Virus Protection

[Disabled]

to change
password.
again to
disabled password.

Change Supervisor Password

Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default N o t I n s t a l l e d

N o t I n s t a l l e d

N o t I n s t a l l e d.

After you set a password, this item shows I n s t a l l e d

I n s t a l l e d

I n s t a l l e d.

To set a Supervisor Password:

Select the Change Supervisor Password item and press .

From the password box, type a password composed of at least six
letters and/or numbers, then press .

Confirm the password when prompted.

The message “Password Installed” appears after you successfully set your
password.

To change the supervisor password, follow the same steps as in setting a
user password.

To clear the supervisor password, select the Change Supervisor Password
then press . The message “Password Uninstalled” appears.

If you forget your BIOS password, you can clear clear it by erasing the
CMOS Real Time Clock (RTC) RAM. See section “2.6 Jumpers” for
information on how to erase the RTC RAM.