Q-Tech QT6T - Manual (Page 2)

MIL-PRF-55310/16J
2
Inches mm Inches mm
.002 0.05 .27 6.9
.018 0.46 .300 7.62
.100 2.54 .44 11.2
.150 3.81 .54 13.7
.265 6.73 .887 22.53
Configuration B (high package height (see table I))
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerances are ±.005 (0.13 mm) for three place decimals and ±.02 (0.5 mm) for two
place decimals.
4. All pins with NC function may be connected internally and are not to be used as external tie points or
connections.
FIGURE 1. Dimensions and configuration - Continued.
Pin number Function
1 NC
2 NC
3 NC
4 NC
5 NC
6 NC
7 B - (GND/CASE)
8 OUTPUT
9 NC
10 NC
11 NC
12 NC
13 NC
14 B+
.265