Q-Tech QTV716 Sine Wave - Manual (Page 3)

QTV714, QTV715 and QTV716
Sine-Wave 24 Flat Pack
Sine-Wave 24 Flat Pack
REV.
Q-TECH Corporation
10150 W. Jefferson Blvd.
Culver City, CA 90232
SIZE
A
CAGE NO.
51774
Sheet 3 of 7 1.0
3.1.1 Electrical Characteristics
PARAMETER SYMBOL CONDITIONS VALUE UNIT
Frequency Nom.
fo -
See part number
generation table
MHz
Supply voltage, Nom.
Vs Vs±5%
See part number
generation table
V
Input Current, max.
Is
Vs, nom. / Ta=+25°C Vc/fo,
and 50Ω load 50
mA
Overall Frequency stability
(including Operating
Temperature, ±5% Load
Change, ±5% Supply Voltage
change. 10 year aging, and
radiation)
Δf/fc (Ta)
Contact factory for other
options available
See part number
generation table
ppm
Voltage Control Range For
Frequency Adjustment Min.
Vc DC
See part number
generation table
Volts
Control Voltage at which fo
will occur at 25°C
Vc/fo DC ½Vc ±0.5 Volts
Frequency
Pulling
range, Min Δf/Vc
Over the voltage control
range See part number
generation table
ppm
Linearity, max.
Δf/V
- 10 %
Input impedance, min. Zin - 10.0 KΩ
Modulation freq. bandwidth,
min.
MBW (-3dB)
Vs, nom. / Ta=+25°C Vc/fo,
and 50Ω load 10.0 KHz
Output level Min. Sine Class S, 100 krads (Si)
total dose Min See part number
generation table
dBm
Harmonics Max. -20 dBc
Sub-harmonics Max. -30 dBc
3.2
Absolute Maximum Rating
Supply Voltage 0 to +16.5 VDC
DC Input Current 50 mA maximum
Storage Temperature range -62°C to +125°C
Lead Temperature (Soldering, 10 seconds) 300°C
3.2.1 Physical Characteristics
3.2.1.1 Dimensions - The VCXO outline dimensions and terminal connections shall be as shown in Figure 1
herein.
3.2.1.2 Weight - The VCXO shall weigh less than or equal to 25 grams.
3.2.1.3 Materials - The VCXO package body and lead finish shall be gold in accordance with MIL-PRF-38534.
3.2.2 Environmental Conditions
Sine Vibration MIL-STD-202, Method 204, TC “D”