Pro Series 500198 POWERED JAC - Manual (Page 2)

Operation
To use Jack:
1. Chock wheels of trailer.
2. To raise the trailer off the ball, open the coupler and toggle the motor switch to
extend the jack.
3. To lower the trailer on to the ball, activate the motor switch in the opposite di-
rection. This will retract the jack. After the coupler has fully engaged the ball,
continue retracting the jack up to the “STOP” decal on the inner tube. Be sure
to close the coupler.
4. If for any reason electric power is lost, remove the round plastic cap located on
the top surface of the jack, insert the manual crank (included) and rotate in de-
sired travel direction.
Maintenance
The Powered A-frame jack motor is sealed and maintenance-free. It is important to maintain the electrical system including the battery and charger (not
included). Ensure all connections are tight and free of corrosion and that the jack is properly grounded with the coupler (metal-to-metal contact). Make sure
the battery is fully charged prior to use. If necessary, wash with mild soap and water and rinse thoroughly. Do not direct a high pressure spray at the Pow-
ered A-Frame Jack.
Extend / Retract
Motor Switch
Insert Manual
Crank Here
Limited One Year Warranty
Limited Warranty. Cequent Performance Products, Inc. (“We” or “Us”) warrants to the original consumer purchaser only (“You”) that the product will be
free from material defects in both material and workmanship for a period of one years, ordinary wear and tear excepted; provided that installation and use
of the product is in accordance with product instructions. There are no other warranties, express or implied, including the warranty of merchantability or
fitness for a particular purpose. If the product does not comply with this limited 1 year warranty, Your sole and exclusive remedy is that We will replace
the product without charge to You and within a reasonable time or, at our option, refund the purchase price. This warranty is not transferable.
Limitations on the Warranty. This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, or as a result of
any accident or in any other manner; (c) damage from misapplication, overloading, or improper installation, including welds; (d) improper maintenance
and repair; and (e) product alteration in any manner by anyone other than Us, with the sole exception of alterations made pursuant to product instructions
and in a workmanlike manner.
Obligations of Purchaser. To make a warranty claim, contact Us at 47774 Anchor Ct. W., Plymouth, MI 48170, 1-800-521-0510, identify the product by
model number, and follow the claim instructions that will be provided. Any returned product that is replaced or refunded by Us becomes our property.
You will be responsible for return shipping costs. Please retain your purchase receipt to verify date of purchase and that You are the original consumer
purchaser. The product and the purchase receipt must be provided to Us in order to process Your warranty claim.
Remedy Limits. Repair or replacement is Your sole remedy under this limited warranty or any other warranty related to the product. We shall not be liable
for service or labor charges incurred in removing or replacing a product or any incidental or consequential damages of any kind.
Assumption of Risk. You acknowledge and agree that any use of the product for any purpose other than the specified use(s) stated in the product instruc-
tions is at Your own risk.
Governing Law. This limited warranty gives You specific legal rights, and You also may have other rights which vary from state to state. This limited
warranty is governed by the laws of the State of Michigan, without regard to rules pertaining to conflicts of law. The state courts located in Oakland
County, Michigan shall have exclusive jurisdiction for any disputes relating to this warranty.
Plymouth, MI 48170 USA
800/521-0510
www.cequentgroup.com