Billet Specialties Premium Tru Trac Serpentine System - Small Block Ford User Manual
Page 2
Skin Board #1 - Packaged with Power Steering Pump
Required Tools & Materials
Skin Board #2 - Packaged with Water Pump
3/8-16 x 1-1/4” - Socket Head Cap Screw
(Power Steering Bracket)
5/16”
Medium Split Lock Washer
(Power Steering Pump)
x2
x2
x2
5/16-24 x 3” - Socket Head Cap Screw
(Power Steering Pump)
x3
5/16-18 x 3-3/4” - Block Mounting Stud
x1
5/16-18 x 4-5/8” - Block Mounting Stud
x1
x1
x1
x1
x2
Spacer Nut - 1.569”
Spacer Nut - 2.197”
Spacer Nut - 1.240”
Alternator Spacer
.875”
Tensioner Spacer Nut - 2.129”
PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLING ANY
COMPONENTS OF THE TRU TRAC SERPENTINE SYSTEM
3/16” Allen
5/16” Allen
1/4” Allen
5/32” Allen
5mm Allen
1/2” Box End Wrench
5/8” Box End Wrench
3/4” Box End Wrench
11/16” Box End Wrench
Socket Wrench & Extension
10mm 12pt. socket
1/2” Socket
Anti-seize Compound
RTV Silicone
Permatex Hylomar
®
gasket dressing
Loc-Tite® Thread Locker
New Oil Pan Gasket
Damper Puller
(Lisle P/N 45500 or similar)
Gasket Scraper
Scotch-Brite
®
Pad
5/16-18 Thread Chaser* & Holder
*Thread chasers are available at your local
parts store and are different from
a thread cutting tap.
This kit is designed to be used with the following or similar 4 hole crankshaft
damper (not included)
289/302/351w 1970-1980 302, 1970-1997 351w
Professional Products #80045
Summit Racing #163289
Pioneer #DA-3513
Dimensions: 3.950” overall length 6.400” Dia.
5.0
1981-1995 5.0L
Ford Racing #M-6316-M50
Professional Products #80007
Summit Racing #163302
Pioneer #DA-3021
Dimensions: 3.950” overall length 6.400” Dia.
Other aftermarket dampers must be 3.950” overall length or less (space to 3.950”)
and cannot exceed 6.400” in diameter to clear water pump mount boss and
bolt. Damper must be 4-bolt pattern for crank pulley.
THIS kIT DOES NOT HAvE A PROvISION FOR MECHANICAL FUEL PUMP
Tech Line: 708.588.0505
Fax: 708.588.7181
www.billetspecialties.com
TECH TIP:
Billet Specialties recommends the use of Anti-Seize on all
fasteners to prevent thread lock-up.
x2
5/16-18 Zinc
Coated Hex Nut