Billet Specialties Premium Tru Trac Serpentine System - Small Block Ford - Manual (Page 12)

www.billetspecialties.com www.billetspecialties.com
23
Figure 18: Complete Bridge Bracket Installation
At this time tighten all bridge bracket bolts firmly, leave the bottom alternator
bolt loose and check to see if a shim needs to be added at this time.
The alternator mounting boss may vary in thickness due to the polishing process.
10mm shim washers are provided to shim alternator to bridge bracket (washers
may or may not be needed).
Also tighten A/C compressor shoulder bolt at this time. (A)
Figure 17: Install Alternator
Place alternator between bridge bracket and timing cover aligning the bottom
hole with the bridge bracket and timing cover.
Thread the 10mm-1.5 x 100mm ARP 12pt. bolt through bridge bracket and
halfway through the alternator. Slide the alternator spacer into position between
the alternator and timing cover. Push bolt the rest of the way and finger tighten.
Align top of alternator with bridge bracket and thread 8mm-1.25 x 25mm ARP
12pt. bolt and tighten firmly. (A)
(A) (A)