SENA HD132x Series - Manual (Page 30)

HD132x Series User Manual
30
4.4.2 System Parameter
In Network Mode window, select setting system parameters. (Figure 4.19)
HelloDevice MAC Addr
IP Addr Setup Method
System info receiving server
TCP Comm. Operation Mode
System info transmission cycle
TCP Comm. Server IP Addr.
(Effective in Client mode)
TCP Comm. Server TCP Port #
(Effective in Client mode)
TCP/IP Comm. Port #
of HelloDevice
Figure 4.19 Network Mode Window
System parameters are classified as follows:
l Parameters for the HelloDevice
l Parameters for the data server
l Parameters for the remote server that communicates with the HelloDevice
4.4.2.1 Parameters for the HelloDevice
[IP mode], [TCP mode] and [Notifier] are parameters for the HelloDevice. You need to tell what kind of
IP the HelloDevice uses, i.e. static or dynamic IP, in [IP mode], and what kind of function it requires, i.e.
server, client or server/client, in [TCP mode].