Ocean Optics MMS Raman - Manual (Page 9)

1: Installation
Installation Procedure
Before you power up your Raman spectrometer, you must install the software. See the SpectraSuite
Spectrometer Operating Software Installation and Operation Manual for software installation
instructions. See
Product-Related Documentation for more information on accessing this document.
► Procedure
1. Install SpectraSuite on the destination computer. See the SpectraSuite Spectrometer Operating
Software Installation and Operation Manual for information on SpectraSuite.
2. Connect the camera power supply to the power interface of the device, and plug the power supply
into an AC outlet. All functions of the spectrometer are operational when it is powered on except
for the laser.
3. Locate the USB cable provided with the spectrometer. Connect one end of the USB cable to the
USB interface of the spectrometer camera and the other end into the computer. Your computer
system should detect the new hardware. Follow the instructions for your computer system for it to
recognize the new hardware device.
000-40000-000-02-0906 7