Ocean Optics MMS Raman - Manual (Page 11)

CHAPTER 2
Operating the Spectrometer
This chapter describes the procedure to operate your MMS Raman spectrometer. Follow these
instructions carefully for optimum results.
A schematic layout of the MMS Raman spectrometer is shown below:
Sample Placement
The MMS Raman spectrometer contains an attached sample holder. Remove the sample holder cover and
place the cuvette with your sample into the sample holder. You can adjust its distance from the lens using
the z-axis knob. In general, liquid samples should be placed as close to the lens as possible; solid samples
should be placed as far from the lens as possible.
000-40000-000-02-0906 9