Ocean Optics QE65000 - Manual (Page 6)

About This Manual
iv 220-00000-000-02-201303
• Detailed instructions for OOIBase32 Spectrometer Operating Software are located at:
http://www.oceanoptics.com/technical/ooibase32.pdf .
• Detailed instructions for the Breakout Box are located at:
http://www.oceanoptics.com/technical/HR4_breakout.pdf
• Detailed instructions for External Triggering for firmware versions below 3.0 are located at:
http://www.oceanoptics.com/technical/external-triggering.pdf .
• Detailed instructions for External Triggering for firmware versions 3.0 and above are located at:
http://www.oceanoptics.com/technical/external-triggering2.pdf
Engineering-level documentation is located on our website at
Technical → Engineering Docs.
•
http://www.oceanoptics.com/technical/engineering/QE65000%20Addendum.pdf
•
http://www.oceanoptics.com/technical/engineering/engineering/OEM%20Data%20Sheet%
20--%20QE65000.pdf
You can also access operating instructions for Ocean Optics products from the Software and Technical
Resources CD that ships with the product.
Upgrades
Occasionally, you may find that you need Ocean Optics to make a change or an upgrade to your system.
To facilitate these changes, you must first contact Customer Support and obtain a Return Merchandise
Authorization (RMA) number. Please contact Ocean Optics for specific instructions when returning a
product.