Ocean Optics QE65000 - Manual (Page 15)

2: Installing the QE65000
220-00000-000-02-201303 9
Control Description
Enable Fan Check this box to turn on the cooling fan.
Enable Thermo-
Electric Control Check this box to enable (recommended setting for laboratory conditions) or
uncheck to disable the thermoelectric cooler. Be sure to always turn on TEC
power before applying USB power.
Detector Set Point Enter the target temperature of the QE65000 Spectrometer detector. The default
is -10ºC. The TEC and fans will operate until the detector reaches this
temperature.
Detector
temperature Displays the current temperature of the detector in the QE65000 Spectrometer.
Enable Periodic
Update Check this box to enable periodic update of the QE65000 detector temperature
controls.
Update Interval If you enabled periodic updates, enter the interval period (in seconds).
Show in Status Bar Check this box to display the detector temperature in the status bar.